|
The AlcoSense Mini Breathalyser / Breathalyzer - Personal Alcohol Tester
The AlcoSense Mini (AL2500 BREATHALYSER) is the newest breathalyser offered by Andatech. The Mini personal breathalyser is lighweight, easy to use, and very portable. The AlcoSense Mini Breathalyser uses semiconductor-oxide sensor providing an accurate and exact BAC ( Blood Alcohol Content ) reading at a very wide range - from 0.00 to 0.40 % BAC. No mouthpieces are required whilst using the AlcoSense Sense Mini - just blow into the sensor and your BAC is displayed in seconds. The AlcoSense Mini is accurate, easy to use, and affordable.
AlcoSense Mini Breathalyser Instructions
1. Turning on the power
To turn the unit on, press the power button. The unit will begin a start up process and automatically re-stabilize the alcohol sensor. The LCD display will undergo a countdown sequence, indicating that purge cycles and circuit tests are taking place. This process generally take 30 seconds but can last upto 2 minutes. The warm up process is complete once two beeps sound, the WAIT sign turns off, and 0.00 is displayed on the LCD screen.
2. Blow into the unit
Making sure your mouth is close to the sensor, take a deep breath and blow a for at least 2 seconds.
3. Display
| Range |
Audio Function |
| 0.00% - 0.01% |
1 beep sound |
| 0.02% - 0.04% |
2 beep sound |
| 0.05% - |
Beep sound for 5 sec. |
| Note: The LCD screen will display the exact BAC value, not just a range. |
4. Retesting
When "WAIT" sign on the LCD is no longer illuminated and display 0.00 on LCD , the unit is reset and ready for retesting.
5. Low battery indicator
The AL 2500 Breathalyser lets you know when the battery is low.  sign lights at the low battery and indicates fresh batteries should be installed before retesting.
Cautions( ALKALINE BATTERY ONLY.)
1. Allow at least 15 minutes after consuming alcohol before testing.
2. Enclosed rooms with low ventilation or air conditioning may increase wait time necessary between tests.
3. Spittle or alcohol contamination of the alcohol sensor will delay reset time between tests. In the event of spittle or alcohol contamination, the unit can be shaken to ensure a quick recovery of the sensor.
| Details |
|
| Power supply |
Two AA batteries (not included) |
| Weight |
85 grams |
| Dimensions |
104 ×40 ×20 mm |
| Response time |
Within 2 seconds |
| Sensor |
Semiconductor type alcohol sensor |
| Auto power off |
After 5 minutes without testing |
| Battery Life |
4 Hours of continuous testing |
For calibration information, please click here
Warning
Driving a vehicle after drinking any amount of alcohol is dangerous, increasing the risk of causing injury or death to yourself or others. A reading produced by the AlcoSense Mini Breathalyser, as with all breath acohol testers are only a guide to your actual blood alcohol concentration ( BAC ) as there is no safe levels of alcohol consumption before driving.
Weight: 0.2
|
